DTF TRANSFER - ENGINES & TURBOS SKULL

Dimensions: 

25cm 

Instructions for use: 

1. Lint roll your garment to ensure that any debris is removed 
2. Pre-heat your press/mini/iron (heat will depend on the garment - for cotton, we use approximately 150c)
3. Press your design for 30-40 seconds
4. Wait until the film & garment are cooled to room temperature 
5. Once they have cooled, remove the transfer sheet 
6. Apply a Teflon sheet to the top of your design
7. Re-press for 5 seconds 

All DTF Transfers are cool-peel, meaning the film & garment need to cool before you remove the transfer sheet. They will not adhere if you attempt to remove them hot-off-the-press.