House of Blanks Vinyl Range - Cricut Settings
1. Material Selection
- We recommend selecting “Premium Vinyl - Permanent Glossy” or “Premium Vinyl - Permanent Matte” depending on the finish of the vinyl.
2. Blade Type
- Use the Fine-Point Blade.
3. Cut Pressure
- Default pressure is usually perfect, however if the cut isn’t clean, increase the pressure slightly or select “More Pressure.”
4. Test Cut
- We would always recommend a small test cut (like a star or square) in an unused corner to check the settings before cutting your design as cut settings can vary between machines.
5. Mat Type
- We recommend using a StandardGrip Mat (green) and make sure the vinyl is secure to avoid shifting.